Toyota Yaris 2006-Up Models 5 Speed and Automatic PDF Instruction manual

Part 36. Wiring and routing of relay harness
In the Engine Bay
1. Connect the female relay harness plug to the male harness plug which comes out of the compressor. Make sure the harness plugs are connected securely.
2. Find a suitable location away from engine heat and moisture, and securely mount the relay to the body of the car. Using an existing 10mm bolt, ground the short red non-fused wire coming off the supercharger harness. Make sure plug is locked securely in place on the relay.

3. Connect the fused red wire from the relay harness to the +12v power terminal on the battery
4. Route the blue activation wire into the interior of the car on the passenger side. **note: The blue wire will be connected to the Activation Box.
5. Use the included zip ties and wire loom to secure the relay and wires. Make sure the routing of the wires do not interfere with any moving parts in the motor including the S/C pulley and belts

Download Toyota Yaris 2006-Up Models 5 Speed and Automatic PDF Instruction manual