Toyota Tundra 2000-2006 Mount Kit Personal Plow PDF Installation Instruction Manual

1. Remove the plastic outer bumper. Retain the fasteners.
2. Carefully pull the foam filler off the steel bumper.
3. Detach the cooling tube from the steel bumper, then remove the bumper from the vehicle.
4. Locate the fasteners that held the steel bumper onto the frame. Separate the threaded studs from the locknuts, and reinstall the studs into the vehicle frame. Retain the locknuts.
5. On models with separate, removable splash guards, remove the guards and cut them according to the photo below. After cutting, reattach the splash guards to the vehicle.
6. Remove the tow hook and tie down brackets from the underside of the frame. The shorter pair of fasteners will be reused during this installation. The longer pair of fasteners should be retained with the tow hook and tie down brackets for reinstallation if the snowplow mount is removed.
7. On the inside of the frame, measure the distance from the bottom of the frame rail to the bottom of the frame rail cap. If this distance is 1-1/4″, use the provided frame spacers between the mount and the vehicle frame. If this distance is 1″, do not use the spacers.
8. Place a spring lock washer and a flat washer onto each cap screw provided with the kit and set them aside.
9. Slide the front of the mount onto the threaded studs in the vehicle frame. Align the holes in the rear of the mount with the tie down bracket holes in the bottom of the frame.
10. Using the cap screws and washers from Step 8 and the shorter pair of the tie down bracket fasteners, attach the rear of the mount to the
vehicle frame. If appropriate, be sure to use the spacers between the mount and the frame as described in Step 7. Hand tighten the fasteners.
11. Reinstall the steel bumper using the locknuts retained in Step 4. Reattach the cooling tube to the bumper.
12. Tighten all fasteners according to the torque chart.
13. Place the foam filler back onto the steel bumper, and reinstall the plastic outer bumper.

Download Toyota Tundra 2000-2006 Mount Kit Personal Plow PDF Installation Instruction Manual