Toyota PhatBox Digital Media Player PDF Quick-Start Guide

Section I : Installing the PhatBox (Mounting the PhatBox) When choosing a mounting location remember: Leave at least 3 inches of clearance for the cable. The PhatBox should be mounted parallel or perpendicular to the floor of the car. Don’t mount near wiring or fuel lines. Leave the front of the PhatBox unobstructed for easy insertion of and removal of the cartridge. The unit should be mounted to a hard stable surface, such as particle board or sheet metal.

Section II : Setting up at home Installing the PhatNoise PhatBox of the PhatNoise Music Manager Software
1. Close all Windows programs that may be running.
2. Insert the PhatNoise Music Manager software CD into your PC’s CD-ROM drive. The PhatNoise Music Manager software installation program will launch automatically.
3. Follow the instructions to install the PhatNoise Music Manager software.
4. When the installation is finished, the program setup will ask you to reboot the computer.
5. Once your computer has restarted, plug the power connector into the USB cradle. Make sure the cradle is plugged into a power supply.
6. Connect the USB cradle to a USB port on your PC.
7. Insert the DMS cartridge firmly into the USB cradle. Avoid ‘slapping’ the cartridge into place. The green and red indicator lights should illuminate. The DMS cartridge will then be detected by the computer’s operating system.

Launching the PhatNoise Music Manager
1. Launch the PhatNoise Music Manager software.
2. After the Music Manager splash screen appears, the Load Songs screen will appear. Choose a location on your computer that contains songs you wish to load into the PhatNoise Music Manager database. This may be a music folder you already have (i.e. ” C:My Music”).

Download Toyota PhatBox Digital Media Player PDF Quick-Start Guide