To add to the suspense Audi isn’t very modest when describing the Q5. In glossy books the car is shown in the most glamorous settings and described as: “the new reference in its class” and “a driving experience that knows no equal”.
Please follow the safety instructions and apply the handbrake. Switch on the ignition. Do not start the engine! Press and hold the two outside buttons I + III – releasing only when the diode begins to flash after approximately 20 seconds. This procedure erases the factory-set default codes and does not have to be followed to program additional remote controls. Press the appropriate HomeLink button I, II or III which you want to program and keep holding it until the diode starts flashing slowly. You will now have 5 minutes to copy the signal from your remote control onto the HomeLink transmitter unit.
