Suzuki Modular Instrument Systems PDF Manual Instructions

SUZUKI MODULAR INSTRUMENT SYSTEMS
Suzuki Modular Instrument System (SMIS) uses an easy to connect and expandable cable system to transmit graphic and numerical data to Multi-
Function gauges. Easy to set up and install system can be used with nearly any boat and DF40 thru DF300 Suzuki Outboard. Connected to the NMEA 2000® compatible system, the gauges can display real-time readings from compatible electronic probes and the exclusive SMIS engine interface to monitor all engine functions. (Engine Monitor with 4” gauge only). SMIS Multi-Function Gauges.

The 4” Multi-Function Gauge uses a state-of-the-art high-contrast, dot matrix display to monitor real-time graphic and numerical digital data . When connected into the SMIS system, it can monitor all engine functions, Speedometer, Tachometer, GPS* and many others . *GPS requires additional..The most important part of the SMIS data system DF40 thru DF250 Suzuki Outboards can connect to the system using the exclusive SMIS Engine Interface . (Adaptor Cable also needed for DF300 applications

Connection Cable
The Extension Cable is the mainline of the Suzuki Modular Instrument System . Data communication runs the length of the boat, capped at each end with a 120 ohm Terminating Resistor . NMEA 2000 compatible sensors or other devices can be added by the use of T-connectors throughout the system..

GPS Receiver Module
GPS receiver module interface for display of accurate location and speed on Multi-Function Gauges. Change the standard black bezel to suit your
application . 4 different bezel finishes to choose from for 2” or 4” Multi-Function gauges..

Download Suzuki Modular Instrument Systems PDF Manual Instructions