Nissan D22 Navara and R50 Pathfinder Car Accessories PDF Guide

The astute purchaser will not go past the stylish, versatile, no compromise TJM Type 15 Alloy Frontal Protection Bar – its got it all. Replacement channel for improved approach angles, large diameter raised centre section to accommodate driving lights and engineered for installation of most low mount winches. The TJM Type 15 Frontal Protection Aluminium Bar is light weight and ideal for use in corrosive environments.
• ADR Approved Indicator/Park Lights
• Press Formed Communication Aerial Tab
• Driving Light Provision
• 4mm Channel Design
• High Tensile Chassis Mounting Bolts
• 3.2mm & 4.7mm Tubing Wall Thickness
• Provision for Electric & Ox Hydraulic Winches
• High Polish Finish

TJM’s Type 15 Steel Frontal Protection Bar is made of a thick 3mm steel construction engineered to be as strong as possible.
• ADR Approved Indicator/Park Lights
• Driving Light Provision
• High Tensile Chassis Mounting Bolts
• Provision for Electric & Ox Hydraulic Winches
• 3mm Channel Design
• 2.5mm & 2.6mm Tubing Wall Thickness
• Durable ‘Black’ Powdercoat Finish

TJM T16 Grille Guards are designed to maintain the character of your vehicle. Light weight and fit over the original bumper, they will provide protection to the original bumper and grille.
• 76mm Highly Polished Tube Frame
• Air Bag Compatible Mounting System
• Driving Light Provision
• Optional Stainless Steel Aerial Bracket

TJM Classique side steps feature tread plates and end caps as standard and mount to the chassis of the vehicle. TJM Oval Tube steps are also available. TJM Stylemaster Side Steps are manufactured from anodised aluminium, featuring several non-slip features including an extruded rubber strip along the edge of the step and a rib patterned extrusion. Also included are stylish moulded end caps. Steps are mounted to the vehicle sub-frame with black polyester powdercoated one piece steel mounts for maximum strength.

TJM UTE LINERS – Are custom moulded to suit your vehicle and are easily installed. The liner is moulded to the tray ensuring that it is fully supported in all areas. Made from high impact polyethylene plastic which is resistant to UV light, petrol, diesel, battery acid and most other chemicals. TJM UTE MATS – Are custom moulded to suit your vehicle and are easily installed. The mats are manufactured from 8mm thick,
heavy duty recycled rubber.

TJMs range of Underbody Guards and Sump Guards are made using 3mm thick steel and finished in a Super Alloy 5 coating. Each guard is press folded in strategic areas to increase the strength of the plate and careful thought is given to where the bolt points are situated to prevent the guard from coming loose even when the vehicle is bottoming out. • Drain access holes for sump and transmission are included to allow easy access if and when necessary.

After using a TJM Water Tank you’ll never be without one again. A must for camping, four wheel driving, day tripping, and outback travel. TJM 38 litre under tray Water Tanks are constructed from durable polyethylene and, are supplied with all hardware for easy installation and will fit under the left or right hand side of most drop side trays.

Download Nissan D22 Navara and R50 Pathfinder Car Accessories PDF Guide