Mitsubishi Pajero Vehicle Alarm Fitting Instructions PDF Manual

Place the compact and the alarm siren in the engine compartment, on the support of the passenger’s side shock. Pass the cables through the original core hitch located on the bulkhead that separates the engine compartment and the passenger compartment, passenger side.

Central Unit Position
The modular systems and modules should be positioned to the left of the dashboard, driver’s side.
FOOD
30: connecting a 4 mm 2 red wire located in a multiway connector in the fuse box.
-31: Connect the cable with a terminal directly to the bodywork. IGNITION WIRE
15 / 54: Connect to the BLACK / WHITE wire with SILVER reference located in the wiring placed on the left, along the steering column.
Direction indicators
Connect the green / red wire to the location and the Nr.9
GREEN / YELLOW wire with SILVER reference to the position located in Nr.7
15 way white connector at the bottom of the fuse box under the dashboard side driving.
Power windows
BUS control
The signals to make the connection module are not available.
CENTRAL LOCKING DOORS
Signal of negative control
Connect the LIGHT GREEN / BLACK wire (lock) and the BROWN / BLACK wire (unlock) located in 32 white connector located on the left of the fuse box under the dashboard side driving. For the Bridge series antithefts refer to diagram nr.73 and the 3100 series antithefts refer to diagram nr.73A

Download Mitsubishi Pajero Vehicle Alarm Fitting Instructions PDF Manual