Honda TRX400EX With MSD Enhancer Ignition PDF Manual

Adjustable ignition timing curve: The MSD Enhancer Ignition allows the program arc ignition. Changes in altitude, compression, fuel octane or a number of other variables, requires the ignition be compensated. Enhancer allows you to advance or slow the original timing, as well as to identify different time lines to improve overall performance.

Holeshot Feature: MSD Enhancer Ignition has a special built-in circuit that includes a low rpm limit. / Min. This limit ot. / Min produces a consistent and quick starts. This allows you to focus on the start of the race instead of throttle position. Spark Power: Enhancer Ignition System for Honda 400EX produces a high output spark that is approximately twice the stock spark output.

This increased spark energy allows the use of richer fuel mixtures or even exotic fuel such as alcohol. MSD Ignition reached about 30,000 volts to the spark plugs. Spark plugs: The MSD Enhancer, it is recommended to use spark plugs as cold as possible while still able to start the engine easily. Spark plug gap will largely depend on the compression engine. The higher the compression the smaller plug gap you must run. Simply can be said about the spark plug gap is between .032 and .036.

Taking the time to test the different spaces you best gap for your application. MSD Coil and Spark Plug Wires: MSD Coil features a low resistance (0.2 ohm primary, secondary 2K Ohm) will change the ratio of 70:1 for maximum spark voltage and energy. 8.5 mm Super Conductor Spark Plug Wires are very low resistance (less than 50 ohms feet) for maximum performance Capabilites tension. Even with this low resistance, the wire still suppresses EMI (Electro Magnetic Interference) from distortions of electronic ignition. This is the only wire recommended for use with MSD Enhancer Ignition.

Download Honda TRX400EX With MSD Enhancer Ignition PDF Manual