Honda Civic 2009 Accessory HandsFreeLink PDF Installation Instructions

Customer Information: The information in this installation instruction is intended for use only by skilled technicians who have the proper tools, equipment, and training to correctly and safely add equipment to your vehicle. These procedures should not be attempted by “do-it-yourselfers.”

1.Make sure you have the anti-theft code for the audio unit and the navigation system, then write down the radio presets.
2.Disconnect the negative cable from the battery.
3.Using scissors, cut out the appropriate template as shown.
If the vehicle is equipped with map light, continue with step 4; otherwise, go to step 5.
4.Align the template to the headliner and tape it in place with masking tape. Go to step 6.
5.Measure 145 mm from the front edge of the headliner and align the template to the headliner as shown. Tape the template to the headliner with
masking tape.

6.Using a felt-tip pen, mark the headliner along the template as shown. Remove the template. If the vehicle is equipped with map light, continue with step 7; otherwise, go to step 8.
7.Using a plastic trim tool, remove the left and right lens from the map light console (four retaining tabs for each lens). Remove the map light console (two bolts and unplug the vehicle connector).
8.Remove the right and left sunvisor holders. Using a small flat-tip screwdriver, push the hook, and turn the holder, to remove.
9.Remove the cover from the left sunvisor (four retaining tabs). Remove the left sunvisor (two T-25 Torx screws, and unplug the vehicle connectors, if equipped).
10.Pull down the left grab rail and remove the two caps (four retaining tabs).
11.Using a flat-tip screwdriver wrapped with masking tape, remove the left grab rail (four tabs).
12.Remove the tape securing the map light harness, and move the harness out of the way before cutting the headliner.

Download Honda Civic 2009 Accessory HandsFreeLink PDF Installation Instructions