Ford Taurus 1998 FP-611 Base PDF Installation Manual

FP-611 (1998-Newer Ford Taurus base) is a no-holes passenger base. The installation-holes base does not require drilling holes into the vehicle.
Installing the FP-611 base in the vehicle: Place the two front seats of the vehicle in its rearmost position. Delete the following fasteners that hold the place until the floor of the vehicle: the front right seat on the driver’s side zipper and front left seat on the passenger side zipper.

When lifting the seat up slightly slide FP-611 bases between the vehicle floor and seat. The platform part of the base should be located towards the front of the vehicle. Line up the holes (some base slots that allow front-to-back or side-to-side adjustment) re-install the seat and tighten knobs, ensuring seats and FP-611 Base on the floor.

Download Ford Taurus 1998 FP-611 Base PDF Installation Manual