Ford Mustang GT 2005-2007 Coupe & Convertible Pro-Kit PDF Installation Manual

Installation of a PRO-Kit spring set should only be undertaken by a qualified technician with experience in the installation and removal of suspension springs. • The use of a crane is highly recommended and will substantially reduce installation time. • Never work on or under a vehicle unless it is duly supported by security holders and the wheels lock. • PRO-KIT Springs are marked with 01 and 02 (located at the end of the part number) designation from the front and rear spring, respectively. • PRO-Springs computer must be installed with the Eibach logo right side up.

All original idea spring isolators, shock absorbers and the tube should be kept of the population in the springs and reused • After installation, it is always important to review and adjust if necessary: • Alignment of the tires, rope, wheels and feet. • Tires and / or removal of the wheel fenders. • Distance from the brake line and accessories. • Anti-lock brakes and anti-skid system sensors. • Tire Rotation: To increase the life of your tires, recommended tires rotated every 3,000 miles. Alignment: After installation, will require a full lineup of vehicles through factory specifications. Eibach offers the following adaptation kits for this vehicle.

Download Ford Mustang GT 2005-2007 Coupe & Convertible Pro-Kit PDF Installation Manual