Ford Mustang 4.0L V6 2005-2008 PDF Installation Manual

1. Start by disconnecting the wire harness of the MAF sensor as shown.
2. Next Turn the hose clamp on the stock air tube air box as shown.
3. Remove the stock air tube from the stock air box as shown.
4. Remove the bolt that the stock air box in place and is reserved for reuse by the MAC system.
5. Remove the stock air box by pulling straight up as shown.
6. Remove the two rubber grommets from the air box and install them as shown in the stock location.
7.Using the T20 key moments in the kit, remove the MAF sensor and reserved for reuse by the MAC-air system.
8. Install the two poles to the bottom of the MAC air chamber as shown. Note: The spacer will be mounted at the back post.
9. Install the two hooks on the MAC air space as shown.
Note: The “L” shaped bracket mounted on the outer side of the room air.
10. Installeer de MAC luchtkamer in de voorraad locatie en grendel in het gebruik van de voorraad bout en hardware als aangegeven.
11. Install the MAF sensor to the MAC-mass meter of air using the supplied hardware. Note Do not use the stock hardware on the MAC air mass.
12. Place the rubber seal on the MAC-mass meter of air as
13. Install the MAC-mass meter of air through the air chamber of the speed using the adapter hardware provided

Download Ford Mustang 4.0L V6 2005-2008 PDF Installation Manual