Ford Mustang 1994-2004 A-Pillar Gauge Pods PDF Installation Guide

You’ve chosen a product born of the belief car accessories must adhere to a higher standard. Assembled by hand in the U.S., this pillar will give you the satisfaction of owning a custom part instead of as usual. The installation of this part should be a pleasant task, and can be accomplished with minimal knowledge of basic mechanics and hand tools. The instructions differ slightly from coupe to convertible, as the parties attach to the car in a different way. These differences are clearly marked for your convenience.

First Step Removing OEM Hardtop Mustang A-Pillar: Its factory pillar joins the car with a pair of metal clips to close the pillar on the metal frame of the windscreen. To remove this part, the work of your fingers under the plastic of the column in the top of the windshield (where the pillar meets the headliners). The application of pressure, pull away the pillar of your mount point. One company, a bit of fast motion will release the clip from the top with ease. Once the top clip is free, continue to pull the pillar towards you to release the bottom of the clip.

Mustang Convertible: All Mustangs drop-top pillars are attached to the metal clips car itself is in the coupes. Most of the 1994-1998 Mustang convertible has two metal clips as well as with the coupes. 1999 and newer Mustangs have a metal clip in third place, near the top of the column.

Download Ford Mustang 1994-2004 A-Pillar Gauge Pods PDF Installation Guide