Ford Focus Midget Engine PDF Owners Manual

COOLING SYSTEM The Focus Midget engine is equipped with a reverse rotation water pump impeller, water pump pulley and rotates in the opposite direction from the street version of the engine. This is without prejudice to the coolant flow through the engine, just let the pulley to be driven by the HTD belt instead of using the back side of a serpentine belt.

No changes to the water pump impeller or water pump pulley are allowed. This picture shows a typical “burp tank” installation. The tank is mounted high on the dashboard as possible. A line runs from the middle of the tank of the radiator, and another line runs from the bottom of the tank water to the elbow to the back of the cylinder. The Focus Midget engine is equipped with a reverse rotation water pump impeller, water pump pulley and rotates in the opposite direction from the street version of the engine.

This is without prejudice to the coolant flow through the engine, just let the pulley to be driven by the HTD belt instead of using the back side of a serpentine belt. No changes to the water pump impeller or water pump pulley are allowed. This picture shows a typical “burp tank” installation. The tank is mounted high on the dashboard as possible. A line runs from the middle of the tank of the radiator, and another line runs from the bottom of the tank water to the elbow to the back of the cylinder. The Focus Midget engine is equipped with a reverse rotation water pump impeller, and thewater pump pulley turns in the opposite direction from the street version of the engine.

This is without prejudice to the coolant flow through the engine, makes it simple pulley withthe HTD belt driven instead of using the back side of a serpentine belt. No changes in the water pump or water pump impeller pulley are allowed.Coolant leave the head on the cast elbow located at the rear of the engine, and causes the motor to pump her. As the engine runs on methanol, and the compression ratio is increased, excessiveheat is generally no problem. Therefore, a standard-type Midget radiator proved more than adequate. High pressure racing radiator caps not necessary to maintain acceptable temperatures, £ 16 caps have been sufficient. All main coolant lines must be at least -10, or 5 / 8 “internal diameter.

Download Ford Focus Midget Engine PDF Owners Manual