Ford F-250 2005-2009 Super Duty 4WD PDF Installation Manual

Pre-Installation Notes
1. Special literature required: OE Service Manual for model / year of the vehicle. Consult the manual for proper disassembly / assembly procedures of OE and related components.
2. Supports the recommendations Replacement fasteners, retainer and farmers are called in the OE manual.
3. Larger wheel and tire combinations may increase leverage on suspension, steering, and related components. By selecting combinations larger than OE, the additional stress you could bring to the OE and related components.
4. Post suspension system vehicles drive line vibration. Corners may require tuning, slider on shaft may require replacement, shafts should be renewed or trued, and U-compounds may need to be replaced.
5. Safe and sound block vehicle prior to the installation of Ready Lift Suspension Components Inc.. Always wear safety glasses when using power tools.
6. If the installation must be carried out without a hoist, Ready Lift Inc. asus board recommends changes back first.
7. Because the load options and original ride height variances, the amount of lift is a base figure. Final ride height dimensions will vary in accordance with original vehicle attitude. Always measure the position prior to installation to begin.

POST WARNINGS Instalation
1. Check all fasteners for proper torque. Check to ensure adequate space between all rotating, mobile, fixed and heated members. Verify clearance between exhaust and brake lines, fuel lines, fuel tank, floor boards and wiring harness. Check steering gear for approval. Test and inspect brake system.
2. Perform steering sweep to ensure brake hoses have sufficient slack and no contact with any rotating, mobile or heated members. Inspect rear brake hoses at full extension is enough slack. Not to perform hose check / replacement may lead to a malfunction. Longer replacement hoses, if needed can be purchased from a local parts supplier.
3. Headlight adjustment is highly recommended.
4. Re-torque all bolts after 500 miles. Always inspect fasteners and components during routine maintenance.

Download Ford F-250 2005-2009 Super Duty 4WD PDF Installation Manual