Ferrari 308 and 328 Mondial Carbon Fiber Inlet Tube PDF Installation Instructions

Thank you for choosing to purchase a Carbonio product. Please take the time to fully read over these instructions before attempting to install the kit. This will greatly speed up the installation process and minimize any difficulties you may encounter. Tools Required:
- Flat head (slot) screwdriver
Kit includes:
1 – Carbon fiber inlet tube
1 – Straight rubber coupler
1 – Anti-vibration ribbed coupler
4 – Stainless steel hose clamps

Step1: Loosen the two hose clamps holding the OEM ribbed inlet tube in place and remove this tube.
Step 2: Place the 4 included stainless steel hose clamps loosely over the ends of the included rubber couplers
Step 3: Slide the straight rubber coupler approximately 1” onto the short end of the carbon fiber tube
Step 4: Place the corrugated fitting onto the lower metal air tube and tighten the clamp
Step 5: Slide the assembly prepared in Step 3 onto the throttle body
Step 6: Rotate/ Wiggle the lower (angled) end of the carbon fiber tube into the top of the ribbed fitting installed in Step 4.
Step 7: Adjust the fit as necessary and tighten the remaining 3 clamps. DO NOT OVERTIGHTEN.

Download Ferrari 308 and 328 Mondial Carbon Fiber Inlet Tube PDF Installation Instructions