Dodge D-Series Spring PDF Installation Manual

Installation manual, D Series Spring set for dodge vehicle, contain information about PRE-INSTALLATION INSTRUCTIONS, These DODGE motor brakes are factory assembled and to adjust immediately after the operation before the engine. Remove any burrs from the motor shaft before attempting to mount the hub. Mount the splined hub on the motor shaft.

The center uses a key so that no installation or guarantee of a key is required. See the chart below for the correct positioning of the brake hub on the motor shaft. INSTALLATION: 56/140/180 DBSC / DBEC MODEL DIAGRAM A: Hub positioning, proper installation, maintenance and operation procedures must be respected. The instructions in the instruction manual must be followed.

Inspections must be made as necessary to ensure safe operation under any conditions. GUIDE FOR MAINTENANCE BRAKE COIL DATA: CURRENT / RESISTANCE RATINGS. ELECTRICAL CONNECTIONS: (See page 5 for wiring diagrams).

Download Dodge D-Series Spring PDF Installation Manual