Dodge 8W 1997 Power Distribution PDF Service Manual

The power distribution system for this vehicle is designed to provide secure, reliable and key points for the distribution of electrical power for the operation of the many standard and optional factory-installed electrical and electronic drive, chassis, safety, security, comfort and convenience systems. Integrated Power Module Integrated Power Module (IPM) is a combination of the Power Distribution Center (PDC) (1) and the Front Control Module (FCM) (2).

The IPM is located in the engine compartment, next to the battery. Removal Guide: Disconnect the positive and negative battery cable. Unsnap cover and remove the B + terminal nut from the integrated power modules (IPM). Remove the B +-cable. Installation instructions: Install the Front Control Module (FCM) (2) to the Integrated Power Module (IPM). Install the B + cable and mother on the IPM-terminal B +. Snap the cover in place. IOD Fuse: All vehicles are equipped with an Ignition-Off Draw (IOD), the backup is integrated within the power module when the vehicle from the factory.

Download Dodge 8W 1997 Power Distribution PDF Service Manual