Daihatsu ECS20 Series Automatic Swing Door Operator Converter PDF Manual

A. Product Data: Furnish manufacturer’s product data and standard details including fabrication, finishing, hardware, operators (specific to manufactured unit being converted), accessories, and other components of the work. Include rough-in diagrams, wiring diagrams, parts lists, and maintenance instructions.

B. Shop Drawings: Furnish shop drawings for fabrication and installation. Show anchors, cement casings, hardware, and other components not shown in manufacturer’s instructions.

C. Templates and Diagrams: Furnish templates, diagrams, block-out dimensions, and other data to fabricators and installers of related work for coordination of operators with doors, frames, hardware, electrical, and other work.

QUALITY ASSURANCE

A. Manufacturer’s Qualifications: Provide converters produced by OPCON
Manufacturing Systems holding United States Patent number US6,176,044 B1, or by authorized and licensed OPCON manufacturer.

B. Installer’s Qualifications: An authorized OPCON technician that is also
authorized by the automatic door operator manufacturer. Installer shall have not less than 3 years automatic door installation experience.

C. Automatic Door Operator Converter shall not impede door operator compliance with ANSI A156.19 (low energy type) or ANSI A156.10 (full speed type).

Download Daihatsu ECS20 Series Automatic Swing Door Operator Converter PDF Manual