Chrysler/Jeep/Dodge AD38 Skim Pin Code ByPass PDF Manual Operating

The AD38 is a small standalone device, the PIN code within the skim module equipped to Chrysler / Jeep and Dodge vehicles with CAN 2,3,4,5 and 6-systems. This will allow new keys to the vehicle. The module is Chrysler Skim terminology for a combined air and engine immobilizer.

Write a new PIN code to the skim-module includes the removal of the skim module, which is around the ignition barrel out of the vehicle, which is a fairly simple process. The PIN code found on the skim module is a fixed code that is on the back of the actual tool. Once the new PIN code has been written to the module, buttons can be programmed into the vehicle by using an advanced diagnostic tool for key programming.

AD38 – OPERATION
1. Disconnect and remove the immobilizer unit from around the ignition barrel of the vehicle.
2. De-solder the coil connections and remove the electronic circuit boards
3. Remove the paint from the legs of the chip on the motherboard.
4. Clip the connector on the chip, with the black dot on the connector to pin 1

Download Chrysler/Jeep/Dodge AD38 Skim Pin Code ByPass PDF Manual Operating