The AD38 is a small standalone device, the PIN code within the skim module equipped to Chrysler / Jeep and Dodge vehicles with CAN 2,3,4,5 and 6-systems. This will allow new keys to the vehicle. The module is Chrysler Skim terminology for a combined air and engine immobilizer.
Before mounting arm pockets should be pruned just before installing the crosses (0 902). Make a cut mark on the forehead down the bottom of the pocket flush with the surface mounting arms control. Also, make a mark in line within the rounded bottom edge to remove the bottom of the plate (Figure 22). Cut the line of the arm pocket and paint any bare metal to prevent corrosion.
Installing rivet nuts
1) Assemble rivet nut installation tool, as shown in Figure 1
2) Place of assembly in the hole in the fabric so that the rivet nut is seated flush with frame
3) Use the key to hold the rivet nut install tool and tighten the bolts (see fig.2)
4) Make sure the nut flush rivet rest while tightening bolt.
5) Tighten bolts to 30 lb-ft (41N-m)
