Find a suitable location inside the cab to mount the TruSpeed module. The module is water resistant, but it should be installed away from high heat sources such as the heating ducts and vents. In most instances, it can easily be attached to the bottom of the dash using the supplied two-sided tape. Separate the red and black wires from the yellow and green wires on the TruSpeed module. Using the supplied ring terminal, route and attach the black wire from the module to a suitable ground. Trim the wire to length as necessary.
The Jet Performance Module is designed to enhance the performance and drivability of your vehicle. By optimizing the air/fuel ratio, ignition
advance and various other parameters. The Jet Module retunes your engine for maximum performance.
JET STAGE 1 MODULE: The Jet Stage 1 Module is optimized for stock vehicles. Minor bolt on modifications such as free flow air filters and cat back exhaust systems will work with the stage 1 tuning. Premium fuel is recommended for best performance gains, but for normal light driving, lowgrade or midgrade fuels may be used.
Thank you and congratulations on the purchase of a Pacbrake replacement Dodge elbow to increase exhaust flow. Read the entire installation manual carefully to ensure you can complete the installation once started. Check that your Pacbrake kit is correct for the application and contains all the necessary parts as shown in the photo.
REMOVAL OF EXISTING MIRROR:
1. Have both windows in the down position. Remove the trim panel on both doors, start by removing two philips screws. One is located in the hand hold and the other is in the corner in front of the window. (note – there are two trim panel clips below the window).
2. Remove the foam insulation covering the stock mirror mounting nuts.
This Fuel Injection Pressure Tester Kit is designed to perform fuel pressure tests
on most domestic and imported cars and trucks that are equipped with electron
ic fuel injection systems. The tester saves you money by helping you test and
troubleshoot fuel system problems that can affect your vehicle’s performance and fuel economy. The tester can help you identify and diagnose:
• Low fuel pressure • Leaking fuel injectors • Faulty fuel pressure regulator
• Clogged fuel filter • Leaks in the fuel system • Faulty fuel pump
OvERaLL: Musclecar-era power trip adds standard stability control to keep the Challenger‘s tail from wagging; With a base price of $22,000, you can look old-school cool and still be modern. DRivETRaiN: Three engine choices, all the way up to 425 horsepower; new Super Track Pack for more driver control on the SRT8. As retro looking as the new Dodge Challenger is, the clock hasn’t exactly being turned back. Instead, key styling elements have been brought forward from the original 1970s car to find their way into a completely new and modern two-door model.
A factory OEM indicator was taken from a 2001 Chevrolet Silverado with 5.3L V8 and tested to find the Outlet DP required to “set” the indicator or move the yellow indicator into the red zone (see Fig. 2.2). Using a vacuum pump and water manometer to test the indicator, the authors determined that an Outlet DP of about 5.7 kPa was needed to set the indicator to the level corresponding to a clogged air filter.
Currently, the use of exhaust brakes cause high temperatures in automatic transmission with torque converter slip. And only a small part of the retarding force is transmitted through a hydraulic torque converter clutch majority. Co-Pilot was developed to provide lock-up capability in all gears. NOTE: The transfer Dodge ATS Valve Body must be installed on the recovery 1 and 2 degree of lock-up capability. The factory computer is programmed to disengage lock-up under many conditions that prevent the transmission of power.
Photos and drawings accompany the text, allowing a quick orientation and parts identification. Installation is a selection of instruments listed in a table at the end of this section. We also suggest that you have a Dodge shop manual and become familiar with the details of your car’s systems. Guides can be obtained from your local Dodge dealer or you can select one of Helm Publications at (800) +782-4356. You have the most beautiful street compressor available for the 1997/2001 5.2/5.9L Dodge engine.
Police Up ? tter’s Guide was compiled with the help of the service and technical specialists to assist vehicle maximum ? tters in achieving the highest standards of safety and quality in their products. This guide is divided into topics relevant to maximum ? tters police vehicles. References are made to the 2006 Dodge Charger and Magnum Service Manual appropriate service procedures, torques specifications ? cation, component separation and other standard information that is shared with the unmodified vehicle.
