Cat-Back Dual Extreme Exhaust 02-06 Cadillac Escalade Ext/Esv PDF Instruction Manual

To Remove Stock Exhaust Cut Your Stock Tailpipe Off, Remove Hangers From Rubber Grommets, Use Wd-40 To Help With Removal. Now Un-Bolt Your Factory Exhaust At The Flanges Located Just After Your Y-Pipe. Bolt Passenger Side Headpipe # A Onto Factory Dome Using Hardware Kit # L. Do Not Tighten. Insert Hanger Into Rubber Grommet, Next Slip Driver Side Headpipe # B Onto Factory Pipe Use Clamp # H To Secure. Do Nottighten Next Install Muffler #C. Slide It Onto Headpipe 1-1/2” To 2”. Attach To Headpipes With Clamp # H. Inlet Shoud Go Towrds The
Motor. Inlet Of Muffler Is Looking Into The Louvers. Do Not Tighten. Outlets Will Be On The Bottom.

Next Install Driver Side Tailpipe Hanger # J On To Rear Of Frame. You Will Remove The Factory Air Pump Bracket And Install Our Braket In Between Pump And Frame. Install Grommet #K Onto Rear Tailpipe Hanger Install Passenger Side Tailpipe # E Into Muffler 1-1/2” To 2” . Insert Welded Hanger Into Rubber Grommet. Use Clamp #I To Secure Pipe To Muffler. Do Not Tighten.Install Drivers Side Overaxle Tailpipe # D Into Muffler 1-1/2” To 2”. Attach To Muffler Outlet Using Clamp #I Insert Welded Hangers Into Rubber Grommets. Do Not Tighten.

Install Exit Pipes #F Onto Tailpipe. Rotate Exit Pipe And Tailpipe To Get The Best Fit For Your Vehicle With Proper Clearances. Use Clamp #I To Secure Together. Do Not Tighten.Install Your Stainless Steel Tips. To Clean Tips Use Any Stainless Or Aluminum Cleaner And A Scotch Brite
Pad. Now Go Back And Tighten All Nuts, Bolts And Clamps Starting From The Front And Working Back.

Download Cat-Back Dual Extreme Exhaust 02-06 Cadillac Escalade Ext/Esv PDF Instruction Manual