Buick Lucerne 2006-2007 Bracketron Phone Mount PDF Installation Manual

Before installing a custom frame mountain and instructions. Start the installation by removing a dash bezel that surrounds the radio and air conditioning. For this, insert the Dash Trim Tool (Part Number SIT-104) in the side of the frame as shown in Figure One. Start with the bottom right corner and release one clip. Continue releasing the remaining 5 videos (a total of six).

If the bezel released all six clips, unplug the lead from rear bezel if necessary. Set bezel aside carefully. S 9 / 32 “socket and driver, release in the upper right corner of the 9 / 32″ bolt from the radio. Set screw aside in a safe place. Instead of CBM over the top corner of the radio installation of the card and replace the factory bolt. Carefully install the dash in reverse order securing all lines on panel and screws. Install any Bracketron phone holder or AMP compatible device to your Bezel Mount

Download Buick Lucerne 2006-2007 Bracketron Phone Mount PDF Installation Manual