10185077 — HO 350 Camaro Conversion
Chevrolet engineers have developed an emission-legal conversion kit to install a High Output 5.7-liter (350ci) small-block V8 in a 1982-87 Camaro
originally equipped with an LG4 or L69 305ci V8 engine and a 700R4 automatic transmission. This coordinated package of components significantly improves vehicle performance while retaining all required emission controls.
Chevrolet 60° V6
The Chevrolet 600 V6 is a compact powerhouse. This innovative engine has beaten both the competition and the elements in off-road racing. It is a proven winner in sports car racing, and it has a promising future on America’s oval tracks in the Midget classes. A Chevy V6/60° engine is the
perfect power-plant for a high-tech street rod or an ultralight autocross machine. GM Performance Parts offers the basic building blocks for a high-
performance V6/60°, including light alloy engine cases, high-compression pistons, and high-volume oil pumps.
TOOLS REQUIRED FOR INSTALLATION:
Powered Screwdriver
#2 Phillips Head Bit
Wire Cutters
T-50 Torx
5/16” Wrench
Terminal Crimpers
6” Bit Holder Extension
7mm Nut Driver
Section 1: Disassembly of the turbo system
The first task is to start removing all the parts/pipes/vacuum lines to allow access to the turbochargers. BE SURE TO SOAK ALL TIGHT NUTS & BOLTS WITH ‘PB BLASTER’ PRIOR TO REMOVAL! This will cut down on wasted time. Take your time and follow the repair manual step-by-step until you are down to only the turbos and exhaust manifold remaining, then move on to SECTION 2.
TOOLS NEEDED FOR DASH PANEL DISASSEMBLY
Dash Trim Tool (Part #SIT-104)
# 2 Phillips Screwdriver
9/32” Open End Wrench (for swivel)
Marking Pen
TOOLS NEEDED FOR MVM MODIFICATION (if required)
4 inch Mounted Bench Vise
12 oz. Ball Pein Hammer
Standard Tin Snips
Small File
EXTERIOR
• Luggage rack, roof-mounted with center rails
• Headlamps, halogen composite with automatic exterior lamp control and flash-to-pass feature
• Daytime Running Lamps
• Mirrors, outside power-adjustable, body-color
• Glass, Solar-Ray light-tinted
• Wipers, front and rear intermittent with pulse washers and non-variable delay
• Liftgate, rear with glass
Included items with Celica / Vibe Coilover kit – Please inspect each item for defects before installation:
• (2) 100mm Threaded sleeves with dual-locking perches (rear assembly)
• (2) 78mm Threaded sleeves with daul-locking perches (front assembly)
• (2) 7” Springs 0700-250-006 (6kg/mm spring rate) -rear assembly
• (2) 5” Springs 0500-250-008 (8kg/mm spring rate) – front assembly
• (2) Aluminum upper mounts – front assembly
• (2) Aluminum dust caps – front assembly
• (2) Polyurathene upper mounts – rear assembly
• (2) Thick rubber O-rings for rear assembly
• (6) Thin rubber O-rings for rear assembly
• (2) Steel rings O.D. 52.5mm, I.D. 48mm, TH 4mm
• (2) Washers O.D. 33mm, I.D. 15mm, TH 3mm
• (2) Spanner wrenches
INSTALLATION – Please refer to factory service manual if available Before the removal and installation of parts, please refer to the factory service manual , or equivalent.
KIT CONTENTS VERIFY THE CONTENTS OF THE SYSTEM. It should contain the following:
1 DIS8-CHEVY Electronic Distributor
2 Four Terminal Coil Packs
8 Spark Plug Wires
8 Spark Plug Wire Terminals
8 Spark Plug Wire Boots
1 Mechanical Parts Bag
1 Electrical Parts Bag
1 Instruction Booklet W/Coil Pack Mounting Template
