The hotel is the ECU against the firewall in the engine bay. Let the ports by tilting the clamps hold that the plug in. If it’s easier for you, remove the ECU by the firewall. With the help of a selection list will help you remove the cover plate direction that the wiring.

You can find a suitable place for the assembly of the fuel controller module. Make sure that the fuel controller is not in contact with moving parts or will not be damaged by parts or dirt. Mounting it on the ECU location or attaching them to the main harness is in order.

It is too easy to get busy with everything Prius automatically does for you, especially with the multi-display, the constant performance information. The hybrid system has been designed so you could ride as a traditional car.

To check the remarkably smooth & quiet ride. Let the computer worry about how to save gas and reduce emissions. For security, gain on the brakes before the start has always been highly recommended in all types of vehicles anyway. But in the Prius, it is required. Because if you do not, you will notice that only the accessories will power-up.

Introducing the 2008 Subaru Impreza WRX STI (Subaru Technica International) is the highest standard-edition trim in the Subaru Impreza compact car line, produced by Japanese automaker Subaru. This car with a boost of 12 - 305 HOP - plus lower end torque, bold 18-inch alloy wheels and more performance-oriented Symmetrical All-Wheel Drive and dynamic controls, the all-new Impreza WRX STI is just what the true enthusiast is waiting.

Consult your owner’s manual for instructions on how to download and removing the screen top. All the hardware for its soft top must be removed. This includes the trim around the body. Some of the screws Canvas Top Hardware Hardtop at the facility will be used to keep them available.

For more detail installation instruction, please get it the PDF Manual Guide.

Download Installation Instruction Tracker Suzuki Sidekick-Vitara 1999 PDF Manual Guide

The Audi TT is a sports car manufactured by Audi since 1998 in Gyor, Hungary, now in its second generation — and available as a 2+2 coupé or two-seater roadster.

These instructions are for the Volkswagen Audi TTand Mark IV chassis of vehicles. The pictures shown are of an Audi TT. Volkswagen applications use the same size brackets, rotors and hats, and the caliper bodies are identical, so the facilities are very similar in all vehicles.

Tools required:
1. Flathead screwdriver.
2. Electrical crimper/cutter.
3. Fine needlenose pliers or c-clip remover (or even something with a pointy tip)
4. 4mm or 5/32” hex key, ideally a 3/8” driver style. A similar size of torx will do in a pinch. Driver extensions are very handy.
5. 8mm and 10mm socket driver.
6. Work light

Please download and see more detail for the procedure of installation in following PDF Manual Guide. Good Luck to you.

Download Volvo Installation Instructions for short shifter kit PDF Manual Guide

G-Class M-Class SLK Sprinter Saloon Vito Oil Filter (Lubrication) C-Class E-Class G-Class Kombi Saloon T1 Turbocharger O-Ring/Seal617 187 01 85 Clutch,radiator fan (Cooling System) C-Class E-Class Kombi Saloon Water Pump (Cooling System) Clutch,radiator fan (Cooling System) -Class E-Class G-Class Kombi S-Class Sprinter Saloon T1 Unimog V-Class Vario Support,cooling fan (Cooling System) Mounting,automatic 140 240 11 18 transmission 140 240 13 18 (Automatic Transmission) 140 240 18 18 220 240 02 18 220 240 05 18 Engine Mounting (Engine Mounting) Oil Seal,automatic 123 271 02 80 transmission 201 271 03 80 (Automatic Transmission)

15,000 KM (Engine Maintenance)
**Replace engine oil (API SM/SL 10W-30)**Replace engine oil filter**Inspect cooling system**

15,000 KM (Chassis And Body Maintenance)
**Inspect brake and CVT/automatic**trans-axle fluids (For level and leaks)**Inspect power steering fluid and lines**(For level and leaks)**Inspect brake and exhaust systems**Inspect steering gear and linkage, axle and**suspension parts and drive shafts**(For damage, loose or missing parts)**Inspect wheel alignment (If necessary rotate**and balance wheels)**Inspect brake pads, rotors and other brake**components**Inspect foot brake and parking brake**(For free play, stroke and operation)**Lubricate locks, hinges and hood latch**Inspect seat belt, buckles, retractors,**anchors and adjuster**Clean or replace ventilation filter (If fitted)**Replace brake fluid (Severe use only)****

Nissan has made a significant and growing investments in North America, starting with the opening of Nissan Motor Corporation USA in 1960, and continue with the production of some cars and trucks at one of the world’s most advanced manufacturing facilities, Nissan Motor Manufacturing Corporation USA in Smyrna, Tennessee, vehicle Styling at Nissan Design International in San Diego, California, and Engineering at Nissan Research and Development in Farmington Hills, Michigan.

High-beams
Lights when the high-beam headlamps are switched on. Traction control is active (if any) currently lit when the ignition is switched ON. It also illuminates when the Traction Control system begins applying and releasing the brakes and engine to adjust the properties to limit wheelspin a state. It will be lit for the duration of the event Traction Control. For more information, visit the Driving chapter.

Turn Signal
Lights when the left or right turn signal or hazard lights are turned on. If one or both of the indicators stay on continuously, or flash faster, check for a burned-out turn signal lamp. You can find information Exterior onions in the care and maintenance chapter.